Major Meraki upgrade, Splash page URL configuration has to be updated

Following a Major Meraki upgrade, the Splash page URL configuration has to be updated. The following article will explain to you how to proceed step by step.

There are two options available to update your splash page configuration:

1. Use Cloudi-Fi SSID automatic configuration

2. Manually update the splash page URL configuration

Cloudi-Fi SSID automatic configuration

Go to Settings Integration Meraki, click on the three-dot button, and select Configure SSIDs, as shown in the screenshot below:

Once the SSIDs list screen appears, select the SSIDs where Cloudi-Fi has to be enabled or updated:

Following this action, you may have to edit the SSID configuration on Meraki to customize the Wallgarden Whitelist if the authentication option relays on third-party

Manual Splash page URL update

Go to Settings Integration Meraki, click on the three-dot button, and select Configure SSIDs, as shown in the screenshot below:

First of all, you will have to get the Splash page URL from the SSIDs configuration option, under the "Manual" tab, click on copy splash page URL:

Once you get the Splash page URL, connect to your Meraki Dashboard, go to your Wireless Splash page, and select the SSID you have enabled Cloudi-Fi.

Finally, update the custom Splash page URL with the new one: